In civil construction, concrete leveling is a process which attempts to correct an uneven concrete surface by adjusting the base on which the surface rests. This method can be used to provide a more uniform appearance for a floor, along with providing a much greater amount of structural integrity and strength.
Concrete levels are generally used to provide a consistent level of footing throughout a construction site. This level is then used for different purposes such as: determining the grade of a new driveway or sidewalk, ensuring that a slab flooring will provide the proper amount of support for a sub-slab flooring, and in cases where soil conditions have created a surface with too high of a grade. Some construction sites may even require concrete levelers to avoid a lack of stability in a sub-slab area. This is often necessary if you are building or remodeling a building and do not wish to disturb the existing grade.
Concrete levelers are normally designed in a very specific manner in order to ensure a level surface at all times. This includes making sure the base material is level when it is first laid, and then leveling it after it has been laid. While there are other methods of leveling a surface, concrete levelers are the most widely used in the construction industry.
Concrete leveling equipment is available in two basic varieties. The first type is known as a leveling jack. This is a flat surface piece which is used to level a concrete surface. The other type is the vertical surface leveling unit which uses a vertical platform to lay the concrete slab.
Concrete leveling equipment is usually available from a concrete company or concrete contractor. The cost of these types of equipment can vary according to the type of material they are used with. Typically the concrete contractor will offer a discount on these types of equipment.
Concrete levelers are highly effective when used correctly. Their ability to level correctly is one of the main reasons they are so popular in the construction industry.
Concrete leveling can be used to provide a level surface in areas that have a sloping roof. In these cases the base material will need to be raised until the entire roof is level. This method should only be used when the entire roof is flat, because if the roof slope is high this will cause too much strain on the concrete. The leveler should be raised just enough to provide a level surface without causing damage to the concrete. When using the concrete leveling equipment make sure to ensure that you are raising the concrete up about half a foot off the roof line.
Another popular use for concrete leveling is in the case of building a slope. If you have a slope where the concrete is not level from the top of the foundation down, the concrete will need to be raised by a few inches each day to provide a level surface.
Concrete leveling is not a difficult process but you do have to be careful when you are using it. There are certain things to watch for in order to avoid serious damage to the concrete and to your flooring system.